Kraig Coomber
email: fly@moyesusa.com
phone: 714.402.7415

HOME | PRODUCTS | SERVICE | CONTACT



LitespeedRS
LitespeedS
Litesport
Sonic
XT 145


Matrix
Contour
Flex
Eaze


2008 Parts Price List


Visit the LiteFlite website - home of the Dragonfly



Visit Moyes Delta Gliders for accessories and more information.

LITESPEED RS
Description   |   Specifications   |   Options   |   Documents  

Options
Mylar (PX05/PX10/PX20) Sail
The Mylar option provides a stiffer sail surface, therefore increasing glide performance.  The leading edge is PX20 Mylar, with the main sail constructed from PX05 and PX10 Mylar.
Smoke Inlaid Mylar Sail
The smoke inlaid Mylar sail uses a semi-transparent dark cloth in the centre of the sail's top surface.  The dark cloth is surrounded by the white Mylar cloth.  In addition to the aesthetic advantage, the smoke inlaid sail reduces the overall weight of the sail by about one kilogram.
Carbon Fibre Outer Leading Edge
The carbon fibre outer leading edge is lighter than the standard aluminium outer leading edge and therefore decreases wing tip inertia, thus improving the manoeuvrability of the glider.

The carbon fibre outer leading edges save approximately 730 grams off the weight of the glider.  This is quite significant as the weight is towards the tip of the sail, thereby having a more significant reduction in wing tip inertia.

Carbon Fibre Inner Leading Edge
The inner carbon fibre leading edge further reduces the overall weight of the glider.

The carbon fibre inner leading edges save approximately 900 grams off the weight of the glider.

Carbon Fibre Leading Edge Inserts
These very thin, light yet strong inserts are positioned in a sown pocket within the leading edge.  They run nearly the full length of the leading edge and assist with wind deflection on the leading edge, providing a clean, smooth leading surface.
Carbon Fibre Dive Struts
These high quality carbon dive struts replace the standard aluminium components for an additional weight saving.

The carbon fibre outer leading edges save approximately 340 grams off the weight of the glider.  This is quite significant as the weight is towards the tip of the sail, thereby having a more significant reduction in wing tip inertia.

Carbon Batten Set
This option includes the four top surface battens that are supported by the dive sticks and the two inner under surface battens.  The carbon battens are significantly stiffer than the aluminium, allowing for improved tuning of the glider.
Standard Uprights with Round Speed Bar
Standard Upright with FAST Aerodynamic Aluminium Speed Bar
Zoom Uprights with Carbon Fibre Performance Speed Bar


HOME | PRODUCTS | SERVICE | CONTACT

© The contents of Moyes USA website are copyright of Moyes Delta Gliders 2007.